Configuration
-
Is Ethernet needed for using Falcon 4016?
Yes, the management user interface of Falcon 4016 is run through the 1Gb management port. The management port should be connected to the network.
-
Is Ethernet needed for using H3 Center?
Yes, the management user interface of H3 Center is run through the 1Gb management port. All the Falcon models could be accessed by this 1Gb management port.
-
Could I add two HBA cards into one server host?
Yes, as long as there are enough PCIe slots on the server host.
-
Could I mix different GPUs from different vendors on Falcon 4016, such as NVIDIA, AMD, etc.?
Yes, as long as those GPUs are on our compatibility list.
-
Is the fan speed adjustable manually?
No, the fans are not controlled manually. The fan speed is handled by the system automatically based on the system and device temperature.
-
Could different GPU models be used at the same time?
Yes, different GPU models could be installed inside Falcon 4016 and used for one server host at the same time as long as they are on our compatibility list. GPU devices proved workable with Falcon 4016 could be used as if they are directly integrated into the server host. However, the situation still varies from hardware manufacturer to hardware manufacturer. For example, Nvidia CUDA driver only allows GPU under the same model name and with the same memory size to run simultaneously.
-
Do I need to install anything on the server host?
No, no additional software is required to be installed on the server host as we simply use the device native drivers on the host OS.