Compatibility
-
What devices are supported?
You could find them from our compatible list.
-
Could I use PCIe devices that are not on the compatibility list?
Basically, Falcon chassis supports any standard PCIe devices to be installed and distributed to the server hosts. However, H3 Platform could not ensure or guarantee no issue. H3 Platform should not be liable for the damages caused by the non-compatible devices.
-
How much power is provided in each slot?
Falcon 4109:
300W for slot 1:1, 1:2, 1:7, and 1:8 (75W from slot + 225W from AUX cable).
75W for slot 1:3, 1:4, 1:5, and 1:6. (no additional AUX power available)
Falcon 4118:
300W for slot 1:1, 1:2, 1:7, 1:8, 2:1, 2:2, 2:7, and 2:8 (75W from slot + 225W from AUX cable).
75 W for slot 1:3, 1:4, 1:5, 1:6, 2:3, 2:4, 2:5, and 2:6. (no additional AUX power available)
-
What are the requirements for the server host?
The requirements include:
1. The server host should be x86-based.
2. The server host should run the compatible operation systems.
3. The server host should have at least one standard low-profile PCIe slot for HBA card installation.
4. The server host should set BIOS to the following:
- Above 4G Decoding - Enable
- MMIOH Base = 56TB
- MMIO High Size = 1024G
5. The server host should install the drivers for the allocated devices, and H3 Platform only supports the devices on our compatibility list.